FAQ

Soft washing and pressure washing are two different methods used for cleaning various surfaces, such as buildings, decks, roofs, and sidewalks. They differ primarily in terms of the pressure and the cleaning solutions used.

1. Pressure Washing:

   • Method: Pressure washing uses a high-pressure stream of water to remove dirt, grime, mold, mildew, and other contaminants from surfaces. The pressure is typically measured in PSI (pounds per square inch).

   • Pressure: Pressure washers can deliver high pressures, often ranging from 1,000 to 4,000 PSI or more, depending on the equipment and application.

   • Use Cases: Pressure washing is ideal for hard surfaces like concrete, brick, stone, and metal where the high pressure can effectively remove stubborn stains and debris.

2. Soft Washing:

   • Method: Soft washing is a gentler method that uses low-pressure water along with specialized cleaning solutions to clean and treat surfaces. It relies more on chemicals and less on the force of water.

   • Pressure: Soft washing typically operates at pressures below 1,000 PSI, which is much lower than what is used in pressure washing.

   • Use Cases: Soft washing is best suited for delicate surfaces like roofs, siding, stucco, wood, and painted surfaces. It's particularly effective for removing organic growth like algae, moss, and mildew.

Key Differences:

1. Pressure: The primary difference is the level of pressure applied. Pressure washing uses high-pressure water, while soft washing employs low-pressure water combined with cleaning solutions.

2. Cleaning Solutions: Soft washing relies on chemical detergents and solutions to break down and kill organic contaminants, while pressure washing primarily relies on the force of water to remove dirt and grime.

3. Surface Compatibility: Soft washing is more suitable for surfaces that can be easily damaged by high-pressure water, whereas pressure washing is best for tougher surfaces that can withstand the force.

4. Effectiveness: Pressure washing is generally more effective at quickly removing deeply embedded dirt and stains, while soft washing is better at killing and preventing the regrowth of organic matter.

5. Safety: Soft washing is often considered a safer option for cleaning because it minimizes the risk of damaging surfaces or causing water intrusion in sensitive areas like roofs.

In summary, the choice between soft washing and pressure washing depends on the specific surface being cleaned and the type of contaminants that need to be removed. Soft washing is the preferred method for more delicate surfaces and organic growth, while pressure washing is better suited for hard, durable surfaces with stubborn stains. It's important to use the appropriate method and equipment to ensure effective and safe cleaning.

The frequency at which you should have your windows cleaned depends on several factors, including your location, the environmental conditions, the type of windows you have, and your personal preferences. Here are some guidelines to help you determine how often you should get your windows cleaned:

1. Location:

   • Urban Areas: In urban environments with more pollution, dust, and debris, you may need to clean your windows more frequently. Consider cleaning them every 2 to 4 months.

   • Suburban and Rural Areas: In less polluted areas, you may be able to go longer between cleanings, such as every 4 to 6 months.

2. Weather Conditions:

   • Rainy or Humid Climates: Areas with frequent rain or high humidity levels may require more frequent window cleaning to prevent mineral deposits and mold growth. Every 2 to 3 months might be suitable.

   • Dry or Arid Climates: In drier climates, windows may stay cleaner for longer periods. You can often clean them every 6 months or as needed.

3. Type of Windows:

   • Single vs. Double-Glazed Windows: Double-glazed or insulated windows may accumulate condensation and dirt more slowly than single-glazed windows.

   • Coated or Treated Windows: Some windows have protective coatings that can reduce the need for frequent cleaning. Follow the manufacturer's recommendations for maintenance.

4. Exposure:

   • Windows that are exposed to direct sunlight may accumulate more dirt and require more frequent cleaning.

   • North-facing windows may stay cleaner longer since they receive less direct sunlight.

5. Personal Preferences:

   • Some homeowners prefer to have their windows cleaned more frequently for aesthetic reasons, enjoying the clarity and brightness that clean windows provide.

6. Special Occasions:

   • You might choose to have your windows professionally cleaned before special events, holidays, or when you're preparing to sell your home to make a good impression.

Ultimately, the frequency of window cleaning is a matter of personal preference and practicality. It's a good idea to assess the condition of your windows regularly and schedule cleaning when you notice a buildup of dirt, streaks, or smudges that affect visibility or the appearance of your home. Regular cleaning can also extend the lifespan of your windows by preventing the accumulation of contaminants that can cause damage over time.

It's common practice to wet down landscaping, vegetation, and grass when conducting pressure washing or similar cleaning activities near these areas. Wetting down the surrounding vegetation serves several purposes:

1. Protection from Chemicals: If you're using cleaning solutions or detergents as part of your cleaning process, wetting the nearby vegetation can help dilute and prevent the chemicals from harming or discoloring the plants.

2. Minimizing Dust and Debris: Wetting down the ground and plants helps to keep dust and debris kicked up by the pressure washing from settling on the foliage, which could otherwise clog the plant's pores or damage leaves.

3. Preventing Soil Erosion: The water can also help to prevent soil erosion caused by the force of the pressure washer. It stabilizes the soil and minimizes the risk of it being washed away.

4. Cooling Effect: In hot weather, the water can provide a cooling effect on plants, helping to prevent heat stress.

When wetting down the area, you typically want to create a barrier by spraying water about three feet from the area being cleaned. However, it's essential to be mindful of water conservation and local water regulations. Use just enough water to provide the necessary protection without wasting excessive amounts.

Additionally, consider using biodegradable and eco-friendly cleaning solutions if needed to further reduce the environmental impact of your cleaning activities. Always follow best practices for pressure washing and landscaping care to ensure a safe and effective cleaning process while preserving the health of your vegetation and the environment.

We carry complete coverage including general liability, workers comp, and auto on all our employees and vehicles. A copy of our declaration page will be provided upon request.

We accept check, credit card, and cash. An invoice will be emailed once work is completed and pay is expected then. Payment by credit card can be made through the email. No payment will be asked for until you are satisfied with work done.

Gutter cleaning is essential for maintaining the integrity and functionality of your home's gutter system and preventing potential issues. Here's why it's important and how often it should be done:

Importance of Gutter Cleaning:

1. Preventing Water Damage: Gutters are designed to channel rainwater away from your home's foundation. When gutters are clogged with debris like leaves, twigs, and dirt, water can overflow and pool around your foundation. Over time, this can lead to water damage, including foundation cracks and basement flooding.

2. Preventing Roof Damage: Clogged gutters can cause water to back up onto your roof, potentially damaging shingles, sheathing, and the roof structure. This can result in costly roof repairs or replacements.

3. Preventing Pest Infestations: Debris-filled gutters can become a haven for pests like mosquitoes, birds, rodents, and insects. Cleaning your gutters can deter these pests from nesting in your home.

4. Avoiding Ice Dams: In cold climates, clogged gutters can contribute to ice dams. When melting snow can't drain properly, it refreezes in the gutters and can damage your roof and cause leaks.

5. Maintaining Curb Appeal: Clean gutters improve the overall appearance of your home. Clogged gutters with overflowing debris can make your home look neglected and reduce its curb appeal.

Frequency of Gutter Cleaning:

The frequency of gutter cleaning depends on several factors, including:

1. Location: If you live in an area with a lot of trees, you may need more frequent gutter cleaning due to the accumulation of leaves and debris.

2. Climate: In regions with heavy rainfall or snowfall, more frequent gutter cleaning may be necessary to prevent overflow and ice dams.

3. Type of Trees: Certain trees, like pine trees, shed needles year-round and can quickly clog gutters.

As a general guideline:

• For most homes, gutter cleaning is recommended at least twice a year, typically in the spring and fall. This schedule helps remove debris from both the growing season and falling leaves in the autumn.

• If your home is surrounded by many trees or experiences heavy debris buildup, you may need to clean your gutters more often, possibly quarterly or even monthly.

• It's also a good practice to inspect your gutters after significant storms to ensure they are not clogged or damaged.

Regular gutter maintenance can extend the lifespan of your gutters, protect your home from water damage, and save you money on potential repairs. If you're unsure about the frequency needed for your specific situation, you can consult with a professional gutter cleaning service for guidance.

Interior window cleaning- remove items from the areas to be cleaned and taking precautions with valuable or irreplaceable items near the windows.

Exterior cleaning – remove all items from areas to be cleaned. For surface cleaning, remove furniture, potted plants, decorations, mats, and any other itemes.